In addition, miz is equal to the cross-section of the yoke legs and a round cross-section is very gradual and theoretically. Isolated from the yoke of the core plates, profiles and pipes with U-bolts with the steel core to minimize noise levels by fitting the crystals oriented 0:30, 0:27, and 0.23 mm thick, M5, M4 alloy sheets are made of silicon. Transition regions of the magnetic circuit used in a 45-degree slant-cut sheets. CNC controlled cutting machines used to cut all the sheets in the magnetic circuit core manufacturing is carried out according to the project. Sector, and the syntax of the magnetic circuit, step-lab with a method for downloading the so-called iron losses are minimized. Cross and longitudinal core are arranged with step-lab applications.

In addition, miz is equal to the cross-section of the yoke legs and a round cross-section is very gradual and theoretically. Isolated from the yoke of the core plates, profiles and pipes with U-bolts with the steel is minimized by fitting noise levels.

3-WINDING MANUFACTURING

Distribution transformer windings and paper-insulated round and flat enamel as a conductive material copper or aluminum conductors and are used. The insulating material used water and voltage resistance. With the application of high-voltage windings of the coil winding specific input, output voltage pulses by increasing the uniformity of floor insulations forced windings Obtainable prevented.

Power transformer windings, depending on the design requirements are in the form of transpose and layer coil. Manufacture of coils and windings to facilitate contact with floor surfaces, vertical and horizontal directions in order to eliminate the gaps winding machines are used systematically pres.

4- MECHANICAL MANUFACTURING

Oil type transformers are used for cooling and insulating material housing. Transformers up to 3150 kVA, depending on the cooling surfaces of the wave wall, the larger of power transformers are manufactured in the boiler with radiators. CNC-controlled machines are used in the manufacture of plasma and wave wall boiler. The finished assembly and welding boilers, pressure seal is tested according to IEC standards.

Wave wall strength 0.65 bar vacuum furnaces, boilers, radiators are designed to be the first bar. Manufacture according to customer specifications completed boilers are subjected to blasting. The dye process is completed with the relevant standards. Boiler cover is designed with the purpose of bringing out the ends of winding.

5-INSTALLATION

Passed onto the active part of the core coils, coils, radial forces to be brought in through the slats in order to move compressed kernel and is mounted on top of the yoke stacked against each other. Is provided with coils scheme also protects against axial forces. The ends of the commutator or stage setting to switch the active part of the necessary resources http://edit-my-paper.net/ and connections made ​​of silver electrodes are made ready for the oven. Existing kilns to remove moisture from the solid insulation materials has active fractions by the method of air circulation within the framework of a program depending on the voltage of the transformer power and dried. And the boiler is mounted on the active part, is performed under vacuum oil filling. On the cover insulators, phase marking, lifting lugs to the removal of the active moiety, thermometer pocket, and additional enhancements are available grounding bushing.